Section 2General InformationGeneral Information 2-1MN1230Introduction Baldor Controls represent the latest technology in microprocessor based motor controls.The Series 29M control adjusts current to produce maximum torque (to zero speed).This provides instantaneous adjustment in response to the speed and position feedbackfrom a shaft mounted resolver.A keypad interface is used to program the Series 29M parameters to customize yourapplication. The keypad is used to program the control parameters, set the mode ofoperation, monitor the Local mode operation status, perform diagnostics, and examinefault log.Baldor has tried to ensure that the information in this manual is correct at the time ofprinting. The information is subject to change without prior notice.Figure 2-1 29M Control and MotorAC Power 29MControlMotorFeedbackSpeedCommandDBAssembly
