32 Operation conditions and prestarting proceduresBALTECH VP-3470Operation manual5.3.3. Digital angle gaugeThe maximum delivery set of BALTECH VP-3470 contains a digital angle gauge,which allows measuring angle of rotation of the parts with a horizontal axis ofrotation. The appearance of the angle gauge and its control elements are shownon the Figure 11.Figure 11. Angle gauge1. On\off button2. LCD display3. Zero button4. Magnet baseHow to use the angle gauge for detection of the installation place of the correctionweights:1. After the installation place of the correction weight is calculated and determined itis necessary to turn the correction weight in such a way that the installation place ofthe trial weight (zero angle) is in the location convenient for installing the correctionweight.2. Mark the position of the test weight on the stationary part of the machine usinga chalk or marker.
