68 BalancingBALTECH VP-3470Operation manualFigure 64. New balancing settingsSet the number of planes (from 1 to 4), number of measure points (from 1 to 16),method (general or angles), number of angles (from 3 to 360; this parameter isavailable for the angle method), angle direction (towards/ against the direction ofrotation), trial weight (removal or adding) (Figure 63).If the angle method is selected, set the number of angles (from 3 to 360). Thenumber of angles corresponds to the number of available installation places of thecorrection weights. To calculate the installation angle divide 360° by the numberof planes.3. Perform the phase measurement. Press Enter to move to PEAK AND PHASEfunction (Figure 57).4. Press Enter to move to INITIAL RUN window (Figure 64).Set the channel for each point.
