Banner SLLVE23-350 Instruction Manual

Contents

Banner SLLVE23-350 Instruction Manual Manual pdf 10 page image

Electrical connections (power, ground, inputs and outputs) are made via unique RD (removable disconnect) cordsets. A"System" as referred to in this manual, is defined as an emitter and its receiver, plus their cabling.Available features include selectable scan code via hookup, an auxiliary fault output, a recessed exit window, and robustmetal housing and end-caps for industry leading durability.Both emitter and receiver feature 7-segment Diagnostic Displays and individual LEDs to provide continuous indication ofoperating status, configuration and error conditions. An adhesive Diagnostics label is provided that includes a summary ofthe operational and error codes. Active Alignment (Segment) Indicators provide beam block information and easierinstallation. SeeStatus Indicators on page 49 for more information.3.1 Appropriate Applications and LimitationsWARNING: Read this Section Carefully Before Installing the SystemIf all mounting, installation, interfacing, and checkout procedures are not followed properly, the Bannerdevice cannot provide the protection for which it was designed. The user is responsible for ensuring thatall local, state, and national laws, rules, codes, or regulations relating to the installation and use of thiscontrol system in any particular application are satisfied. Ensure that all legal requirements have beenmet and that all technical installation and maintenance instructions contained in this manual are followed.The user has the sole responsibility to ensure that this Banner device is installed and interfaced to theguarded machine by Qualified Persons1, in accordance with this manual and applicable safetyregulations. Failure to follow these instructions could result in serious injury or death.The EZ-SCREEN LS Basic ability to perform its safeguarding function depends upon the appropriateness of the applicationand upon its proper mechanical and electrical installation and interfacing to the guarded machine. If all mounting,installation, interfacing, and checkout procedures are not followed properly, the EZ-SCREEN LS Basic cannot provide theprotection for which it was designed.CAUTION: Install System Only on Appropriate ApplicationsBanner EZ-SCREEN LS Basic is for use only on machinery that can be stopped immediately after a stopsignal is issued at any point in the machine's stroke or cycle, such as part-revolution clutched machines.Under no circumstances may the EZ-SCREEN LS Basic be used on full-revolution clutched machinery orin unsuitable applications as those listed. If there is any doubt about whether or not your machinery iscompatible with the EZ-SCREEN LS Basic, contact Banner Engineering.3.1.1 Appropriate ApplicationsEZ-SCREEN LS Basic is typically used for, but is not limited to, the following applications:• Automated production equipment• Robotic work cells• Molding and power presses• Assembly and packaging machines• Lean manufacturing systems3.1.2 Examples: Inappropriate ApplicationsDo not use EZ-SCREEN LS Basic in the following applications:• With any machine that cannot be stopped immediately after a stop signal is issued, such as single-stroke (or full-revolution) clutched machinery• With any machine with inadequate or inconsistent machine response time and stopping performance• With any machine that ejects materials or component parts through the defined area• In any environment that is likely to adversely affect photoelectric sensing efficiency. For example, corrosivechemicals or fluids or unusually severe levels of smoke or dust, if not controlled, may degrade sensing efficiency• As a tripping device to initiate or reinitiate machine motion (PSDI applications), unless the machine and its controlsystem fully comply with the relevant standard or regulation (see OSHA 29CFR1910.217, ANSI/NFPA 79, ANSIB11.19, ISO 12100, IEC 60204-1, IEC 61496-1, or other appropriate standard)1 A person who, by possession of a recognized degree or certificate of professional training, or who, by extensive knowledge, training andexperience, has successfully demonstrated the ability to solve problems relating to the subject matter and work.EZ-SCREEN® LS Basic Safety Light Screen10 www.bannerengineering.com - Tel: 763.544.3164