Banner TCNM-AD Series Parameter Manual

Banner TCNM-AD Series Parameter Manual Manual pdf 50 page image

TCNM-AD/EX/SP Family Software Configuration Parameter Guide48TCNM-ACBB5 GatewayTypeIt allows selecting the Host interface network type (Fieldbus and non-Fieldbus) for communication to/from the Hostnetwork.CAUTIONWhen any Host interface network type is selected, the Main Serial Interface is not available forcommunication and must not be electrically connected in the TCNM-ACBB5 connection box.NOTEWhen using the Backup and Restore Module with a TCNM-ACBB connection box, the module NetType and Address Selection hardware switch settings are read at power-up and override thesoftware settings. For correct software configuration, make sure these switch settings arecompatible with your application.Selections: None No Host interface network type is selected. The MainSerial Interface is available for communication with theHost.Profibus Enables the Fieldbus branch to allow the Profibus interfaceparameters to be configured.DeviceNet Enables the Fieldbus branch to allow the DeviceNetinterface parameters to be configured.Ethernet/IP(Ethernet/IP -TCP/IP)Enables the combination Fieldbus and TCP/IP branches forparameter configuration of either the Ethernet/IP interface(Fieldbus), the Ethernet TCP/IP Services which allow up to2 User Sockets to be configured - (non Fieldbus), or both.IP Addressing in the Line Parameters branch determinesthe method of address selection, either user defined(Static Assignment), DHCP or Remote Assignment.CC-Link Enables the Fieldbus branch to allow the CC-Link interfaceparameters to be configured.CANopen Enables the Fieldbus branch to allow the CANopeninterface parameters to be configured.Profinet(Profinet IO -TCP/IP)Enables the combination Fieldbus and TCP/IP branches forparameter configuration of either the Profinet IO interface(Fieldbus), the Profinet TCP/IP Services which allow up to2 User Sockets to be configured - (non Fieldbus), or both.IP Addressing in the Line Parameters branch determinesthe method of address selection, either user defined(Static Assignment), DHCP or Remote Assignment.Modbus TCP(Modbus TCP -TCP/IP)Enables the combination Fieldbus and TCP/IP branches forparameter configuration of either the Modbus TCPinterface (Fieldbus), the Modbus TCP/IP Services whichallow up to 2 User Sockets to be configured - (nonFieldbus), or both.IP Addressing in the Line Parameters branch determinesthe method of address selection, either user defined(Static Assignment), DHCP or Remote Assignment.