Baracoda RoadRunners Evolution User Manual

Also see for RoadRunners Evolution Laser: Compatibility guide Supplementary guide Brochure & specs

Contents

Baracoda RoadRunners Evolution User Manual Manual pdf 16 page image

Baracoda RoadRunners Evolution – User Guide v1.6 - 16 -Data Capturefor Workforcein MotionThe different reading modeThe different reading modeThe different reading modeThe different reading modessssRoadRunners Evolution has four (4) reading modes. These modes can be changed through both theBaracodaManager software and the Programming Guide.Trigger mode (default setting)Simply press the trigger when you want to scan a barcode.Aiming mode (only available for RoadRunners Evolution 1D & Laser, not for 2D Imager)The Aiming mode has been developed for users who need to scan barcodes very close one to another and needto avoid reading a wrong code. Once in this mode, in order to read a barcode user will have to press the triggertwice. Pressing it the first time will switch on the beam but will not switch on the decoder (thus allowing user toaim at the correct barcode) while pressing the trigger the second time will activate the decoder thus allowingthe scanner to actually decode the barcode.Autoscan modeThis mode enables to scan continuously. In Autoscan mode, the scan beam is continuously on.Smart Autoscan modeFor a battery power consumption optimisation issue, the scanner will be continuously flashing.Option: RoadRunners Evolution allows to activate the option “No duplicate scans” order to not scan twice inthe same barcode. By default, this option is disabled, but can be changed through both BaracodaManagersoftware or Programming Guide.