Baracoda RoadRunners Evolution User Manual

Also see for RoadRunners Evolution Laser: Compatibility guide Supplementary guide Brochure & specs

Contents

Baracoda RoadRunners Evolution User Manual Manual pdf 8 page image

Baracoda RoadRunners Evolution – User Guide v1.6 - 8 -Data Capturefor Workforcein MotionInstalling / replacing batteriesInstalling / replacing batteriesInstalling / replacing batteriesInstalling / replacing batteriesOnly use Baracoda approved rechargeable batteries. The use of any other batteries may damage the scannerand void the warranty. Please remove the batteries when you are storing the scanner for more than 30 days.To insert batteries into RoadRunners Evolution:1. Use a coin or your finger to unlock and remove the battery cover at the back of theRoadRunners Evolution. Turn the lock underneath the scanner to a horizontalposition.2. Insert the battery lid downwards.3. Plug the small battery cable into the battery connector (Zone A in Fig. 2).4. Insert the Baracoda Battery in its location. Pay attention also to well position thebattery connector.5. Slide the cover up and lock it into place.Caution. Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to theinstructions.Switching on the readerSwitching on the readerSwitching on the readerSwitching on the readerRemember to fully charge the battery before first use.In order to switch on the scanner, please press the trigger button.The scanner will switch off after some period of inactivity. The default time period is ten (10) minutes ofscanner inactivity if the device is not connected via Bluetooth, and twenty (20) minutes of scanner inactivity ifthe device is connected via Bluetooth and if the user don’t press the trigger button. These default values can bemodified by the end user.AFig. 2