Baracoda RoadRunners Evolution User Manual

Also see for RoadRunners Evolution Laser: Compatibility guide Supplementary guide Brochure & specs

Contents

Baracoda RoadRunners Evolution User Manual Manual pdf 9 page image

Baracoda RoadRunners Evolution – User Guide v1.6 - 9 -Data Capturefor Workforcein MotionConfiguring your scannerConfiguring your scannerConfiguring your scannerConfiguring your scannerThere are two (2) ways to configure your scanner:• When connected to a host device, the BaracodaManager software (v3.34 min) can be used formultiple setting changes.• The Configuration barcodes In the Programming Guide can be used to configure the scanner withoutusing outside software applications.Reset your scannerReset your scannerReset your scannerReset your scannerTo reset the scanner to its “default settings”, use BaracodaManager software (v3.34 min) or scan the ResetConfiguration barcode.To reset the RoadRunners Evolution –L & -Laser, please scan only “RESET 1” barcode.To reset RoadRunners Evolution –Fs (2D Imager), please scan “RESET 1”, then “RESET 2” barcodes.Reset 1Reset 2SecuritySecuritySecuritySecurityThe Bluetooth connection is secured with a PIN code authentication.You can configure security (enable/disable/change PIN code) with the BaracodaManager software (v3.34) orwith the Programming Guide.The Security is enabling by default: default PIN code is 0000.SymbologySymbologySymbologySymbologyYou can enable/disable any type of barcode decoders with both the BaracodaManager software (v3.34 min) orwith the Programming Guide.