6. Installation ModeShift adjustment of the lens1. Push the cursor key ↑ or ↓ to highlight Lens. (menu 6-15)2. Press ENTER to select.The adjustment pattern will be displayed.With the TEXT key it is possible to toggle between the internal adjustment pattern or the connected source.3. Push the cursor key ↑ or ↓ to shift the image up and down and ← or → to shift the image left or right.Note: The lens can be shifted in a range of :vertical shift : - 2 mm to + 20 mmhorizontal shift : - 5 mm to + 5 mm4. When finished, press EXIT to return to the installation menu or press ENTER to go to the zoom/focus function.INSTALLATIONINPUT SLOTSNO SIGNALBARCO LOGOLENSMENU POSITION[CENTER]800 PERIPHERALMORE ...Select with ↑ or ↓then to returnMenu 6-156.8 Menu PositionWhat can be done ?The Menu position can be changed from bottom right to the center of the image.How to change the Menu Position?1. Push the cursor key ↑ or ↓ to highlight Menu Position. (menu 6-16)2. Press ENTER to toggle between and [CENTER] and [EDGES].[EDGES] The Menu will always be displayed in the bottom right corner.[CENTER] The Menu will always be in the middle of the image.INSTALLATIONINPUT SLOTSNO SIGNALBARCO LOGOLENSMENU POSITION[CENTER]800 PERIPHERALMORE ...Select with ↑ or ↓then to returnMenu 6-166.9 800 PeripheralOverview• Defining the Output module of the RCVDS05• Defining the communication protocol of the RCVDS05112 R5976420 BARCOREALITY SIM 6 ULTRA 14052003
