Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual

Also see for BarcoReality SIM6 Ultra R9040150: User manual

Contents

Barco BARCOREALITY SIM 6 ULTRA R9040150 Owner's Manual Manual pdf 130 page image

7. Service Mode7.11.3 Constant Light Output (Optional)The CLO menu item will be greyed out when this option is not installed.What can be done?In a multichannel setup, due to tolerances on the lamps and optical components (e.g. lenses), or due to the different positions ofthe projectors in relation to the screen, there will always be a difference in light output between the projectors.Within this menu it is possible to track and maintain the brightness level of each projector, the projector will deliver a Constant LightOutput = CLO.How to set up a CLO system?CLO levels in Multichannel setups are controlled through RS232 by e.g. the xRACU™ Master Control Unit.Overview of the CLO menuFollowing ’Adjustable’ parameters are available in the CLO menu:• Tracking Interval: this parameter will determine the time between each Light Measurement.• Following Tracking Intervals are available:- 8s- 16s- 32s- 64s- 128s• Target Light Value: this parameter will set the desired Constant Light Output Value.Following parameters can be consulted to start up or maintain a setup with projectors running in CLO mode:• light value: this parameter will display the current Light Output Value measured by the Light Sensor.• tracking in range: CLO is running in optimal conditions when this parameter indicates [YES].• measuring in range: CLO is running in optimal conditions when this parameter indicates [YES].How to use the CLO menu?1. Push the cursor key ↑ or ↓ to highlight CLO. (menu 7-27)2. Press ENTER to select.The CLO menu will be displayed.3. Push the cursor key ↑ or ↓ to highlight Target Light Value and press ENTER to select. (menu 7-28)4. Use the cursor keys ← or → in combination with the numeric keys to enter the Target Light Value, e.g. 8000, and press ENTERto confirm.5. Push the cursor key ↑ or ↓ to highlight Tracking Interval and press ENTER to select. (menu 7-29)6. Use the cursor keys ← or → to select the desired Tracking Interval, e.g. 16s, and press ENTER to activate. (menu 7-30)Note: The Motorized Dimming menu item is greyed out when CLO is active.DIMMINGLAMP DIMMINGMOTORIZED DIMMINGCLOSelect with ↑ or ↓then to returnMenu 7-27CONSTANT LIGHT OUTPUTTRACKING INTERVAL [OFF]TARGET LIGHT VALUE 8000_______________________STATUSlight value 931tracking in range [YES]meas. in range [YES]Select with ↑ or ↓then to returnMenu 7-28CONSTANT LIGHT OUTPUTTRACKING INTERVAL [OFF]TARGET LIGHT VALUE 8000_______________________STATUSlight value 931tracking in range [YES]meas. in range [YES]Select with ↑ or ↓then to returnMenu 7-29CONSTANT LIGHT OUTPUTTRACKING INTERVAL [16s]TARGET LIGHT VALUE 8000_______________________STATUSlight value 931tracking in range [YES]meas. in range [YES]Select with ↑ or ↓then to returnMenu 7-30126 R5976420 BARCOREALITY SIM 6 ULTRA 14052003