Barco CS-100 Installation Manual
Also see for ClickShare CS-100: Safety manualInstallation manualUser guideInstallation manualUser guide
                                                                | |
Contents
| 
6. CS-100 ConfiguratorImage 6-24Time server setupThe current time is indicated next to Current time.3. Check the radio button next Use NTP.4. Enter a NTP server address next to NTP servers. Enter the IP address or server name.Note: Multiple servers (maximum 5) can be added, separated by a comma.5. Click Save changes to apply.A synchronization with the NTP server takes place. The status field indicates the progress.6.17 Energy saversAbout standbyStandby after (minutes): If there is no client connection detected during the standby timeout period, the Base Unit will enter theselected standby mode.Default setting: Time to standby: 10 min, the Base Unit will enter the Eco standby mode.Eco standbyWhen the Base Unit enters ECO standby mode, it will disable the HDMI output signal and go in low power mode. The Base Unit’sLEDs will be breathing white to indicate the ECO standby mode.Power consumption in Eco standby: 2.6WThe Base Unit will wake up with one of the following actions:• Button or app connecting with the Base Unit• Press the standby button on the Base Unit• "Wake up" signal over the network• Pairing a Button on the Base Unit’s USB port• Detection of display hot plugDeep standbyWhen the Base Unit goes in Deep standby mode, it will shut down all processes, including the Wi-Fi access point and LAN connec-tion. The Base Unit’s LEDs will be dark to indicate this standby mode.Power consumption in Deep standby: 0.4WThe Base Unit will wake up only when the standby button on the Base Unit is pressed.40 R5900022 CS-100 16/02/2016 |
Related manuals for Barco ClickShare CS-100
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine