5. Installation procedures12345Image 5-45Power cabling diagram of a Solaris LD display with optional filter kit.W ARNING : Never connect the Solaris D2 digitizer within the same power branch of the Solaris LD fans. Sub-divide power from the second power row of tiles to provide the digitizer with power.5.12 Installation of the top- , bottom- and side-cladding support bracketsNecessary tools• 5 mm hexagon Allen key.• 10 mm open ended spanner.Necessary parts• Top-bottom cladding support brackets.• Side cladding support brackets.• Bag with M6x25 hexagon socket head cap screws (F).• Bag with M6 hexagon flange nuts (G).• Bag with M6x16 hexagon socket button head cap screws (H).How to install the cladding support brackets ?1. Install at the top and at the bottom of each precision frame two top-bottom cladding support brackets as illustrated. The twobrackets must be placed back to back and than slide into the gab in the middle of the frame. Use two M6x25 hexagon sockethead cap screws (F) and two M6 hexagon flange nuts (G) per pair of brackets. (image 5-46)Note: Only one bracket needs to be installed on the half size precision frames at the side of the display.Ensure that all brackets are aligned.2. Install at the left and right side of both horizontal profiles of the support frame a side cladding support bracket as illustrated. Usefour M6x16 hexagon socket button head cap screws (H) per bracket. (image 5-47)Note: Ensure that the brackets are aligned.R5976773 SOLARIS LD DISPLAY 02/12/2004 49
