R5906113 UDX 07/07/2017 212. Installation preparations2.4 Initial inspectionGeneralBefore shipment, the projector was inspected and found to be free of mechanical and electrical defects. As soon as the projector isunpacked, inspect for any damage that may have occurred in transit. Save all packing material until the inspection is completed. Ifdamage is found, file claim with carrier immediately. The Barco Sales and Service office should be notified as soon as possible.Box contentAfter unpacking the projector it is recommended to check if all following items where included:• One power cords of 2.7 m (3G10, 32A)• One Quick Start guide• One Safety manual• One Web site reference sheet• One remote control unit (RCU)• 2 batteries for the RCU.Mechanical checkThis check should confirm that there are no broken knobs or connectors, that the cabinet and panel surfaces are free of dents andscratches, and that the operating panel is not scratched or cracked. The Barco Sales and Service office should be notified as soonas possible if this is not the case.
