R5906112-06 UDX series848.4.7 Warping – Latency control in a multi projector setupTransport latencyThe added delay in the image processing chain. The value is the number of lines relative to theoutput resolution.LatencyThe total time from the first pixel is coming in on an input source, until the first light representing thatpixel is visible on the screen. This includes the transport delay. The value is normally given inmilliseconds.Functional descriptionEvery projector in a multi–projector setup will have a different latency. This latency depends on the amount ofwarp and on the frequency of the projected image. In order to have no visible difference in the overallprojected image, the user needs to be able to control the latency of each projector.The latency value can be read out in the status menu for each individual projector.How to configure transport delay?1. Read out and note the latency of each projector in the multi-projector setup. You can find this latency underTransport delay in the status menu for each projector.Image 8-352. Identify the projector with the longest delay.3. For each projector in the setup, select Installation → Warp in the main menu.Image 8-36: Installation menu, Warp4. In the Warp menu, select Transport Delay.GUI – Installation
