Barnstead|Thermolyne NANOpure DIamond D11931 Operation Manual
                                                        | |
Contents
| 
Connecting NANOpureDIamond to Computer andCommunicating Though theRS-232 Port UsingHyperterminal or ProcommHyperterminalRS-232 Capture Instructions1. Connect the 9 pin serial cable (part no. WHX18)from the NANOpure DIamond RS-232 port toCOM2: port or (COM1: port) on back ofcomputer.2. From the (Idle) display, press the UP or DOWNarrow until display reads, “Advanced Menu.”3. Press ENTER.4. From the “Printer Attached” display, press theUp or DOWN arrow for (NO).5. Press ENTER.6. Now, during the normal Recirculation mode,date, time, purity and temperature readings willbe sent to the computer once per minute.7. Run your Microsoft Windows program. OpenHyperterminal (located in the accessories direc-tory), give your setting a name and choose asymbol.8. In the “Connect Using:” box, select “direct to”COM2: or (COM1: ) as port (depending on yourcomputer), and click OK.9. Using the selection boxes in the next screen,configure the options as 9600 baud, 8-bit, Noparity, 1 stop bit, Flow Control: None.10. To receive data to a file, select Transfer and33Computer/Printer SetupNoteDue to character set differences,hyperterminal may display the Ω sym-bol as ê. Also, the ° symbol may bedisplayed as ø. |
Related manuals for Barnstead|Thermolyne NANOpure DIamond D11931
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine