Bartec MC 92N0ex Series User Manual

Also see for MC 92N0ex Series: User manual User manual Frequently asked questions

Contents

Bartec MC 92N0ex Series User Manual Manual pdf 9 page image

Mobile Computer MC 92N0 exType 17-A1A.-………… and Type B7-A2A.-………… Basic Security InformationTechnical data subject to change without notice.Revision B / 03/2019 3/79Unintended useAny other use is unintended and may lead to damage and accidents. The manufacturershall not be liable for any use extending beyond the exclusive purpose.1.4 Duties of the operatorThe operator undertakes to only permit persons to work with the Mobile Computers who are acquainted with the basic regulations on safety and accident prevention, and whohave been inducted in the use of the Mobile Computer; have read and understood the documentation, the safety chapter and the warnings.The operator checks that the safety and accident prevention regulations applicable to therespective case of use have been observed.1.5 Safety informationGeneral safety information Do not dry wipe or clean devices in potentially explosive atmospheres! Do not open devices in potentially explosive atmospheres. General statutory provisions or guidelines on occupational health and safety, accidentprevention provisions and environmental protection laws must be heeded, e.g.German Industrial Health and Safety Ordinance (BetrSichV) and nationally applicableordinances. Use suitable clothing and shoes with respect to the danger of hazardous electrostaticcharges. Avoid heat influences outside the specified temperature range. Protect device from external influences! Do not expose device to caustic/aggressiveliquids, vapours or spray. In the case of malfunction or damaged enclosure, removethe device immediately from the potentially explosive atmosphere and bring it to asafe place.1.6 MaintenanceThe pertinent erection and operating provisions for electrical systems must be observed!(e.g. Directive 99/92/EC, Directive 94/9/EC, BetrSichV and nationally applicable ordinancesEN 60079-14, IEC 60079-14 and the series DIN VDE 0100)!Observe the national waste disposal regulations when disposing of the devices.ServicingNo constant servicing will be necessary if operated correctly under consideration of the usermanual and environmental conditions. See Chapter “Service, inspection, repair” in thisrespect.InspectionAccording to EN 60079-17, IEC 60079-17, EN 60079-19 and IEC 60079-19, the operatorof electrical systems in potentially explosive atmospheres is obliged to have these inspectedby an electrician to ensure correct condition.