12ENGLISHGBThe packaging consists of the carton packagingand wooden pallet. There are symbols printed onthe carton packaging that according to theinternational agreements inform about theregulations to follow when loading and unloading,transporting and storing the appliance.When collecting the goods check if the packagingis complete and has not been damaged duringtransport.Any damage should be immediately reported tothe shipping company.Unpack the appliance as soon as possible tocheck if the appliance is not damaged.Do not use a sharp object to cut the carton box. Itmay damage the stainless steel inside the box.Remove the carton packaging from bottom to top.When unpacked check if the appliance isaccording to the order.In case of any difference inform the sales agentimmediately.Do not store the packagingmaterials (nylon bags, polystyrene foam,clips ...) in the reach of children!Remove the protective PVC layer from the outand inner surfaces. If possible, do not use anymetal tools.8.2. Installation (service technician)All the stages of the installation must be carefullyplanned.The location should be equipped with all supplyconnections and production waste outlet. Thelocation should also be properly lit and complywith all hygiene and sanitary requirementsaccording to the binding regulations.The appliance should be installed with theminimum 10 cm clearance from the wall. The devices with the oven must beinstalled at least 50 cm from the wall.Locate the device in the horizontal position byadjusting the individual feet.To ensure the correct operation ofthe appliance, the appliance must beinstalled and operated in the thoroughlyventilated room only.When the device is to be installednear the walls, partitions, kitchen cabinets,decorative elements, etc., they must bemade from non-flammable materials orcovered with suitable non-flammablematerials.The device IR091M00 must be fixed to the floor.5010cmTHISSIDE UPCAUTIONGLASSKEEP DRY