3ENGLISHGB3. SAFETY Read carefully the guidelines andinstructions in the instruction manualbefore you use the appliance.The instruction manual contains generalinformation on how to safely use and maintain theappliance. Retain the manual for future reference. Electric installation conforms to CEI EN60335-1 and 60335-2-36 regulation.To prevent any hazard, the damagedmains power cable may be replaced by themanufacturer or service personnel only.The manufacturer took extra care when designingand manufacturing to prevent any safety or healthhazard to the personnel operating the appliance.Please read carefully the guidelines in theinstruction manual and instructions placed directlyonto the appliance. Above all, observe all thesafety instructions.Do not intervene in or remove the protectivedevices installed in the appliance. Non-compliance may lead to severe safety and healthhazard against people. We recommend to performa few tests to know the layout and main functionsof the control panel, particularly those to switchthe appliance on and off.The appliance is intended only for the use it hasbeen designed for and any other use isconsidered as the use not in compliance with theintended use.The manufacturer is not liable for materialdamage or damage to person caused bymisapplication or incorrect application of theappliance.Any maintenance work that requires specialtechnical license or special skills may beperformed by qualified personnel only.To provide hygiene and protect foods from dirt, allthe elements that have direct or indirect contactwith the foods and all border areas must bethoroughly cleaned. Use only the cleaning agentsintended for use in contact with food and avoidusing flammable agents or harmful to health.After each use of the appliance make sure that allthe heating elements and control elements havebeen switched off and the cable unplugged.In case of prolonged interval in using theappliance disconnect all power supply cables andthoroughly clean the inside and outside elementsof the appliance.In direct connection to the mainsthe safety switch should be suppliedwhere wire joints dilation is large enoughto secure disconnection in category IIIovervoltage, which is in accordance withthe installation rules. The device requires some safetymeasures during installation, positioning,fixing, and connecting to the power supply(section 8 “INSTALLATION”). Do not clean the device with directstream of water. When the cooker surface is crackedimmediately disconnect it from the powersupply. Do not place any plastic containers onhot surface of the cooker. Avoid using the aluminium foil forprotecting the surfaces during the deviceoperation.

SAFETY

GENERAL INFORMATION AND WARNINGS

Index plate

USE AND OPERATION

Heating plate switching on and off

Oven switching on and off

CLEANING AND MAINTENANCE

Cleaning of ceramic plate

PROBLEMS DURING OPERATION

Installation (service technician)

Installation of the appliance in a line

Check-up (service technician)

APPLIANCE DISPOSAL

Bartscher IR091M01 Installation, Operating And Maintenance Instructions

IR091M01

IR092M01

IRE92M01