BaseWall Dual WAN VPN Firewall VPN 3000 User Manual
                                                                            | |
Contents
| 
BaseWall, Tel: +31-74-2491004, Fax: +31-74-2593934193 : LoadbalancingThis screen is only operational if using Internet connections on both WAN portsFigure 3-2: Load BalanceLoad balancing – Load Balancing• Enable – Use this to enable your Load Balance settings. Unless this is checked, the othersettings on this screen have no effect.• Balance Type – Select the desired option:• Bytes rx+tx – Traffic is measured by Bytes.• Packets rx+tx – Traffic is measured by Packets.• Sessions established – Traffic is measured by Sessions.• IP Address – Traffic is measured by IP Address.• Loading Share on WAN 1 – Enter the percentage (%) of traffic to be sent over WAN 1. If oneWAN port connection has greater bandwidth than the other, the one with the greater bandwidthshould be given a higher percentage of traffic than the other.NAT statistics This section displays the current data about WAN 1 and WAN 2. You can use thisinformation to help you "fine-tune" the settings above.Interface statistics This section displays cumulative statistics. Use the "Restart Counters" buttonto restart these counters when required. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine