BaseWall Dual WAN VPN Firewall VPN 3000 User Manual
                                                                            | |
Contents
| 
BaseWall, Tel: +31-74-2491004, Fax: +31-74-259393446Tunnel to BaseWall Client – This describes an IPSec tunnel from a the VPN 3000 to the BaseWallClient Software.• VPN Tunnel List– here you can add a new tunnel or change an existing one from the list Therouter can setup a maximum of 50 tunnels• Tunnel Name– In order to distinguish the tunnels, you have to give the “Tunnel” a name..• Tunnel – Only after you enable the tunnel check box, the tunnel can be connected.• WAN port – You can choose WAN1, WAN2 or Any to make the VPN connection• Local Security Network– These entries identify the private network on this VPN router, thehosts of which can use the LAN-to-LAN connection. You can choose a single IP address, the subnet,or a selected IP range to make VPN LAN-to-LAN connection.• Distinguished name remote client – Use for example an email addresspete@BaseWall.com• Preshared key - Choose a shared secret for this entry, this must be the same on both units.• ActionConnect – this button will initiate the tunnelSubmit Query – this button will add the policyVPN Configuration – Advanced settingsWhen you use the tunnel to BaseWall unit or tunnel to BaseWall client configurations you don’t needto use the Advanced Settings. Only when you want to make adjustments for a IPSec tunnel to a thirdparty unit you can choose here settings that may be required. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine