Camera InterfaceBASLER A102k 2-1DRAFT2 Camera Interface2.1 Connections2.1.1 General DescriptionThe A102k is interfaced to external circuitry via two connectors located on the back of the camera:• a 26 pin, .050” Mini D Ribbon (MDR) female connector used to transmit video data, controlsignals, and configuration commands.• a 6 pin, micro-miniature, push-pull receptacle used to provide power to the camera.A status LED located on the back of the camera is used to indicate power present and signalintegrity. Figure 2-1 shows the connectors and the LED.Figure 2-1: A102k Connectors and LEDMicro-miniature6 Pin Receptacle26 Pin FemaleMDR ConnectorLED
