Configuring the CameraBASLER A102k 4-21DRAFT4.2.5.7 Read Microcontroller Firmware Version4.2.5.8 Read FPGA Firmware VersionPurpose: To read the microcontroller firmware version.Type: This is a read only command.Read Command: Cmd-ID R/W-Flag Data Length Data0x40 1 3 -Response: Cmd-ID R/W-Flag Data Length Data0x40 0 3 3 BytesData Format: Byte 1 Low byte of firmware version BCD codedByte 2 High byte of firmware version BCD codedByte 3 Register Layout IDPurpose: To read the FPGA firmware version.Type: This is a read only command.Read Command: Cmd-ID R/W-Flag Data Length Data0x41 1 3 -Response: Cmd-ID R/W-Flag Data Length Data0x41 0 3 3 BytesData Format: Byte 1 Low byte of firmware version BCD codedByte 2 High byte of firmware version BCD codedByte 3 Register Layout ID
