Basler Vision Technologies BIP-1300c User Manual
                                                                                                  | |
Contents
| 
Revision HistoryBasler IP Camera 85Revision HistoryDoc. ID Number Date ChangesAW00072101000 30 Jul 2008 Initial release of this document.AW00072102000 19 Dec 2008 Added information to Section 1.1 on page 1 pointing out the availability offirmware updates.Updated the web browser recommendation and the procedure foraccessing the camera in Section 2 on page 5.Added the Sharpness parameter description to Section 3.3.1 on page 12.Added the Auto (limited) selection to the White Balance Mode parameterdescription in Section 3.3.1 on page 12.Added the Whitepoint X and Whitepoint Y parameter descriptions toSection 3.3.3 on page 16.Added the Stream Display parameter description to Section 3.4.1 onpage 19.Added the H.264 selection to the Encoder Type parameter description inSection 3.4.2 on page 26.Added the GOP length parameter description and the Output Sizeparameter description to Section 3.4.2 on page 26.Expanded the description of the Encoder Mode setting in Section 3.4.2 onpage 26.Added a description of how to use the Config Management button toSection 3.10.3 on page 56.Expanded the description of how to use the Start Firmware Update buttonin Section 3.10.3 on page 56.Updated the technical specifications for the BIP-1000c and added thetechnical specifications for the BIP-640c to Section 7.1 on page 77.Updated the technical specifications for the BIP-1600c and added thetechnical specifications for the BIP-1300c to Section 7.2 on page 79.Added the stress test results in Section 7.3 on page 81.Added H.264 licensing information to "Software License Information" onpage 83. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine