Basler Vision Technologies BIP-1300c User Manual
                                                                                                  | |
Contents
| 
Accessing the CameraBasler IP Camera 52 Accessing the CameraThe following instructions assume that you have used the Basler IP Camera Installation Guide toinstall your camera and that you know either the IP Address or the host name of your camera.Your camera can be accessed from most standard operating systems using a web browser. Therecommended browser is Windows™ Internet Explorer 6.0 or higher.Accessing the Camera From a Web Browser1. Start your web browser.2. If you know the IP Address of your camera, type the IP Address into the Address field of yourbrowser and press the Enter key. For example: http:/172.17.1.44(If you don’t know the IP address you can find it using the Basler BIP Finder software asdescribed in the Basler IP Camera Installation Guide.)If you know the host name of your camera and if your network has a properly configured domainname server, type the host name into the Address field of your browser and press the Enter key.For example, for a camera with a host name of Basler-12345678 you would enter:http://basler-123456783. Your browser will connect to the camera’s web server and the Basler Surveillance Web Clientwill be displayed. Assuming that the camera is set to the defaults, a live MJPEG video streamwill be displayed in the Live Stream 0 tab as shown below. |
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine