Baumer GIM500R Manual
Also see for GIM500R: ManualManualAssembly instructions
                             | |
Contents
| 
Baumer_GIM500R_CANopen_MA_EN.docx 21/29 www.baumer.com03.19Range requestSensors can also be searched for within a certain range. For this purpose, the following objects are sent insequence:7E5h 46h Vendor ID reserved7E5h 47h Product code reserved7E5h 48h Revision number LOW reserved7E5h 49h Revision number HIGH reserved7E5h 4Ah Serial number LOW reserved7E5h 4Bh Serial number HIGH reservedEach sensor with the relevant parameters logs on with the following message:7E4h 4Fh reserved3.4 Object DictionaryAccording to CiA (CAN in Automation) the objects are subdivided into three groups: Standard communication objects:1000h – 1FFFh Manufacturer-specific objects:2000h - 5FFFh Device-specific objects:6000h - FFFFhThe table below is giving a summary of all SDO objects supported by the inclination sensor.Object Object number in HexName Name of the parameterFormat Data typeAccess ro = ReadOnly, wo = WriteOnly, rw = ReadWriteDefault Default upon first init or restore defaultSave yes saved in None Volatile Memory |
Related manuals for Baumer GIM500R
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine