Becker DTM High Speed 7910 Operating Manual

Also see for 7910: Installation guide

Contents

Becker DTM High Speed 7910 Operating Manual Manual pdf 53 page image

131Radio ModeAutostore MW, LWPress the button.Press the multifunction button until `YTXYTWD TSis displayed.Press the multifunction button until 2DDP `YT XYTWD is displayed.The 6 best received stations will be stored under the stationbuttons in the order of their reception quality.To exit the Autostore memory level, switch off the Autostorememory using the multifunction button `YTXYTWD(EE). The radio switches back to the station button plane.Manual Tuning FMIn Radio Menu Mode use multifunction button to se-lect the 2Y@YHTSXHc level.Press the multifunction button twice.Now turn the right rotary control .Tuning will take place in increments of 100 kHz.The currently active manual tuning is indicated by &' in thedisplay. If the right rotary control is not turned after a shorttime, &' will disappear from the display and the manual tun-ing is switched off.Manual Tuning MW, LW, KWPress the button.Press the multifunction button twice.Then turn the right rotary control .Tuning will take place in increments of 9kHz (MW),3kHz (LW) or 5kHz (SW).The currently active manual tuning is indicated by &' in thedisplay. If the right rotary control is not turned after a shorttime, &' will disappear from the display and the manual tun-ing is switched off.S69 & `YTXYTWDTSR R X &@SXXX& 2Y@YHTSXHcR R &@S&@SS69" & 2GTWY6@aDR R &@S&@S