Becker Mexico Pro 7930 Operating Manual

Contents

Becker Mexico Pro 7930 Operating Manual Manual pdf 15 page image

65Radio modeTraffic programme (TP)If an RDS diversity station broadcastsTP announcements, it is possible to in-terrupt CD, CDC/AUX, MW, LW, SWmode or the mute mode and switch thebroadcast TP announcements through.Moreover, you can listen to one FM sta-tion while receiving TP announcementstransmitted by another FM station.There are two ways to select a TP sta-tion:- Automatic tracking- Direct programmingAutomatic tracking transmits TP bulle-tins over the FM station currently beingreceived. If the selected FM station haspoor signal quality or is not a TP station,the unit applies specified criteria tosearch for a new TP station.Direct programming enables a TP sta-tion to be programmed that is not the FMstation being received. This means, forexample, that a particular FM station canbe listened to whilst TP announcementsare received from another one.If the programmed TP station’s recep-tion is poor, the unit switches to auto-matic tracking until the programmed TPstation can be restored.If the unit detects a TP station, this is in-dicated on the display by TP.appears on the display to indicatethat the traffic programme is active.Activating / quitting the TPmenuActivating: Press the button (traffic an-nouncements cannot be transmitted). Press the multifunction button.Quitting: Press the button; otherwise the TPmenu will automatically disappear af-ter 8 seconds if no further operationsare performed.Switching TP on / offIn all modes and wavebands, TP can beturned on or off by pressing and holdingthe button for more than 2 seconds.TP can also be switched on or off whilstin the TP menu: