CAB 4614-200L Service Manual
                                        | |
Contents
| 
14 145 Installation5.2 ToolsScrewdriver with parallel blade 2.5 To adjust the throttle valvesProduct sensorHexagon key L-wrench 0.8 To adjust the sensors(in delivery state of the applicator)2.5 or matched norm parts(in delivery state of the applicator))4 Pad adjustmentsChanging padFllat-round nose - straight- angledMount/Dismount of tubesOpen spanner SW 8 Changing the throttle valvesSW 13 Setting the spring power on theadapter boltSW20 Changing the cylinderManometer ± 7 bar Air pressure controlTable 4 Tools5.3 Mounting and dismounting the coverTo initiate the applicator or for adjustments it is necessary to dismount the cover (2).After these adjustments have been completed remount the cover.! Warning! Do not operate the applicator without cover (2). Dismount the cover only for service and/or adjustment purposes.231Dismount1. Loosen screw (3).2. Lift cover (2) upwards until the cylinder assemblyhas been cleared.Mount3. Guide the cylinder (1) into the hole in the top of thecover (2) .4. Tighten screw (3) to fix cover (2) to the applicator.Fig. 8 Cover |
Related manuals for CAB 4614 Series
manualsdatabase
Your AI-powered manual search engine