CAB 4614-200L Service Manual
                                        | |
Contents
| 
257 ConfigurationThe applicator can be operated in different ways. While the original process stays the same, the operation mode canbe chosen from within the printer setup.The most important setting is the selection between the operation modes "Stamp on" and "Blow on".For the applicator 4614/16 the operation mode "Blow on" must be selected.Additionally the applicator has different application modes concerning the order of printing and applying within onelabelling cycleBlow onPrint/Apply xApply/PrintWaiting position topxApply/PrintWaiting position bottomxTable 5 Operation and application modesAdditionally all operating modes can be adjusted by setting different time delays.i Note!For more information about the printer configuration and the functions of the keys of the navigator pad Configuration manual of the printer or Operator's manual of the printer7.1 Method for Changing the Printer Setup1. Press menu key.2. Select Setup > Machine param. > Applicator.3. Select and adjust the needed parameters.4. Return to the "Ready" mode.7.2 Quick Mode for Setting the Delay TimesBeside the standard method for the printer configuration there is a quick mode available to adjust the delay times.i Note!The quick mode settings can be made during operation. The changes directly affect the current print job.1. Press the menu key for at least 2 seconds.The first delay time appears on the display.2. Adjust the delay time by pressing the ~ key and key.3. To switch between the different delay times press the } key.4. To leave the quick setup mode press the | key.The selected delay times are stored in the printer. |
Related manuals for CAB 4614 Series
manualsdatabase
Your AI-powered manual search engine