CADDX NX-6 User Manual

Also see for NX-6: Application note User manual

Contents

CADDX NX-6 User Manual Manual pdf 8 page image

8Step 3 • Press the [STAY] key.• Thestay light will illuminate indicating that all interior zones arebypassed. (All interior devices will bypass automatically, giving theuser freedom of movement within the interior area.)• Thebypass light will illuminate if any zone(s) are bypassed. If anyzone(s) have been bypassed previously by the user, the light(s)corresponding to the bypassed zone(s) will illuminate, alerting theuser that a zone(s) may be unprotected and can be faulted withoutan alarm.Step 4 • To toggle from a “delayed entry” mode to an “Instant” mode, pressthe [STAY] key again.• Theinstant light will illuminate indicating that the entry/exit doorshave no entry delay.USING THE QUICK ARM (Optional, see page 1)The Quick Arm feature may be used if it is enabled. Quick Arm will allow the userto arm the security system in the AWAY mode by pressing the [EXIT] key, or armin the STAY mode by pressing the [STAY] key. This feature is used for ARMINGONLY, and will not disarm the security system. This is ideal for a maid or babysitter code, etc.CHANGING MODES WHILE YOUR SYSTEM IS ARMEDÉ Pressing the [STAY] key will turn on/off (toggle) a delay on entry/exit doorsand turn on/off (toggle) theinstant light.É (Optional) Press the [BYPASS] key at this time to turn on/off (toggle) alldesignated interior zones.É (Optional) When armed, pressing the [EXIT] key will start the exit delay,enabling you to leave the building.IMPORTANTTheinstant light needs to be off at this time if you plan on re-entering thebuilding; otherwise you will create an alarm. You may restore an entrydelay by pressing the [STAY] key again.DISARMING YOUR SYSTEMWhen you enter the protected area through one of the designated Entry/Exitdoors, the keypad control will sound a continuous tone for the duration of theentry delay time, or until you enter a valid code. The redarmed light will go offand the tone will stop. The security system is now DISARMED. If a valid code isnot entered before the end of the entry delay, an alarm will occur. (NOTE: If theredarmed light is flashing during the entry delay, the alarm system hasbeen activated in your absence. Leave the building immediately and callyour alarm company and/or the police from a safe location.)