CATH-TECH Hexcorder Pro Operation Manual
Also see for Hexcorder Pro: Operation manual
                                            | |
Contents
| 
Rev 1 – July 2018 Cath-Tech Hexcorder Pro ManualPage 26 of 38Pipe LocatorPipe Locator FeaturesThe Hexcorder Pro can be connected to Bluetooth-enabled pipe locators Vivax-Metrotech.Data such as depth of cover and signal strength can be stored in the Hexcorder Pro data filealong with the survey data.Important note:The Hexcorder Pro app must have permission to use your location, allowing it to search for newBluetooth devices. When the app asks for permission to use your location (a requirement ofAndroid to allow apps to search for Bluetooth devices) you must allow it or else the tablet willnot be able to find your pipe locator.RadioDetection PairingPreparing the RD8000/8100 pipe locator to pair*These steps should be performed quickly, with minimal delay between steps*First time pairing1. Power on the tablet2. Follow the instructions above to ready the locator, the Bluetooth icon on thelocator screen will be blinking3. Open the tablet Bluetooth menu4. Wait for the locator to be detected. The name will be something like “RD8K”followed by a 4 digit number5. Select the pipe locator to pair, when prompted enter the passkey “1234”6. The locator is now paired and known to the tablet |
Related manuals for CATH-TECH Hexcorder Pro
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine