Cabletron Systems 2000 Getting Started Manual

Also see for 2000: User guide User guide

Contents

Cabletron Systems 2000 Getting Started Manual Manual pdf 80 page image

Chapter 4: Installing and Starting Cabletron CoreWatch80 SmartSwitch Router 2000 Getting Started Guide– Choose Custom and click Next if you are an advanced user and want to specifywhich files to install. Options with a check mark will be installed. Click to the leftof an item to select or clear its check box.8. Click Next.9. Specify a name for the CoreWatch program group, which is Cabletron CoreWatch bydefault. Then click Next.10. When the Explorer window reappears, close it.11. Click Finish to complete the installation.Starting Cabletron CoreWatchThe method you use to start CoreWatch depends on whether you installed it in the Solarisor Windows environment. If you choose to integrate CoreWatch with HP OpenView orCabletron SPECTRUM during installation, you can start CoreWatch from within eitherenvironment in both Solaris and Windows NT/Windows 95/98.Separate discussions on starting CoreWatch in the Solaris and Windows environmentsand from within SPECTRUM or HP OpenView follow.Starting CoreWatch in SolarisTo start CoreWatch in the Solaris 2.5.1 or 2.6 environment, enter the following commandat the Solaris prompt:where <ipaddr> is the IP address of the SSR and <community-string> is the SSR’scommunity string. If you do not know this information, see your network administrator.Notes:• If the CoreWatch command is not found, you can locate it in /opt/CScw/bin.• If you do not supply the <ipaddr> and the <community-string> parameters, theCoreWatch Login Dialog box appears and prompts you for them.Starting CoreWatch in Windows NT or Windows 95/98To start CoreWatch in the Windows NT or Windows 95/98 environment:1. Select the Start menu, choose Programs, choose CoreWatch, and then chooseCoreWatch. The Login Dialog box appears.% CoreWatch -a -r