Port Redirect Function Screen2H28-08R SmartSwitch 2208 User’s Guide5-55Source Port [n] (Selectable)Allows a selected port [n] to be changed to a source port.Destination Port [n] (Selectable)Allows a selected port [n] to be changed to a destination port.Errors (Toggle)Allows the user to configure the source ports to either send errored framesto selected destination ports, or to drop errored frames, and send onlyvalid traffic to the destination ports. The default setting of this field is ON.The current setting for the port is displayed in the Remap Errors field. Forinformation on how to change the default setting, refer to Section 5.15.2.Status (Toggle)Allows the addition or deletion of the source and destination portsselected in the Source Port [n] and Destination Port [n] fields.5.15.1 Displaying the Source and Destination EntriesThere can be more than one Port Redirect Function screen depending onthe number of port redirect entries. Each screen displays up to 8 portredirect entries. If there is more than one screen of redirect entries, theNEXT and/or PREVIOUS command displays at the bottom of the screen,allowing the user to navigate to either the next or previous screen.For example, with three screens of entries, the NEXT command displaysat the bottom of the first screen. In the second screen, the NEXT andPREVIOUS commands display. In the last screen, only the PREVIOUScommand displays.To display the screen following the one you are currently viewing, use thearrow keys to highlight NEXT. Press ENTER and the next screen ofentries displays.
