Chapter 5: Local Management5-722H28-08R SmartSwitch 2208 User’s Guide5.21 NETWORK TOOLSThe Network Tools function allows the user to access and managenetwork devices. Figure 5-27 shows the Network Tools Help screen.To access the Network Tools screen, use the arrow keys to highlight theNETWORK TOOLS menu item in the Device Menu screen and pressENTER. The Network Tools screen displays.Figure 5-27 Network Tools ScreenThe Network Tools functions are performed using a series of commands.Entering commands in Network Tools involves typing the command to beexecuted at the Network Tools prompt, adding any desired or requiredextensions, and pressing ENTER.There are three categories of commands in the command set:• Built-in Commands – Allow the user to access and manage networkdevices. The commands are: arp, bridge, defroute, netstat, ping,reset, show, traceroute, soft_reset, telnet, and link_trap.• Special Commands – Allow the user to exit from Network Tools. Thecommands are done, exit, and quit.Commands Available to the User:-> help22511-75arpnetstatshowdefrouteping resetbridgeSPECIAL:done, quit, or exit - Exit from the Network Tools.For help with a specific command, type 'help '.->Built in Commands:traceroutesoft_resetWelcome to Network Toolstelnet link_trap
