Chapter 5: Local Management5-662H28-08R SmartSwitch 2208 User’s GuideMTU (Read-Only)The MTU (Maximum Transmission Unit) field displays the maximumframe size (in octets) that a frame may contain to be received ortransmitted from this interface.Speed (Read-Only)The Speed field displays an estimate of the interface’s current bandwidthin bits per second.Link Status (Read-Only)This field displays the current link status of the interface. This fielddisplays either “Link” or “No Link”.Duplex Mode (Read-Only)This field indicates whether the interface is operating in normal (standard)or full duplex mode. This field displays the actual setting of the port, or“Standard”, or “Full Duplex”.Interface [nn] (Command)This field is used to select an interface number for viewing statistics. Forinstructions on how to use this field refer to Section 5.19.1.CLEAR COUNTERS (Command)This command is used to reset all statistic counters to zero. For details onhow to use this field, refer to Section 5.19.2.5.19.1 Displaying Interface StatisticsTo display the statistics for any interface, proceed as follows:1. Use the arrow keys to highlight the Interface [nn] field at the bottomof the screen.2. Press the SPACE bar to increment (or press the DEL [delete] key todecrement) the interface number.Press ENTER (neither the Interface # field nor the statistics will updateuntil ENTER is pressed).
