Cabletron Systems 9E423-36 User Manual
Also see for 9E423-36: Owner's manual
                                  | |
Installing the 9E423-36 Module2-2Figure 2-1. User Accessible ComponentsThe DIP switch on the 9E423-36 Module (shown in Figure 2-1), is an eight switchDIP located near the bottom left corner of the module. Each switch is setaccording to the functions described in Table 2-1. If switch settings are changed,the processor on the module must be reset, using the reset switch or byrepowering the module, for the changes to take effect.SMB1 PromDRAMSimmFlashSimmBoot PromStats EngineSocketDipSwitch12345678 |
Related manuals for Cabletron Systems 9E423-36
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine