9032947 ELS100-24TXG User Interface 29SNMP Configuration MenuThe SNMP Configuration Menu allows you to modify SNMP-relatedconfiguration parameters. Select a from the System Configuration Menuto view the SNMP Configuration Menu. Figure 3-5 shows the SNMPConfiguration Menu and accompanying table describes the SNMPConfiguration Menu.Figure 3-5. SNMP Configuration MenuSNMP CONFIGURATION Access Control: READ/WRITEa. SNMP Private Community Name privateb. SNMP Public Community Name publicc. Trap Destination #1 000.000.000.000d. Community Name #1 publice. Trap Destination #2 000.000.000.000f. Community Name #2 publicg. Trap Destination #3 000.000.000.000h. Community Name #3 publici. Trap Destination #4 000.000.000.000j. Community Name #4 publicx. Previous MenuEnter Selection:Selection DescriptionSNMP PrivateCommunity NameThe community name for read/write SNMP access tothe device (1-10 character range; the default name is:“private”).SNMP PublicCommunity NameThe community name for read only SNMP access tothe device (1-10 character range; the default name is:“public”).Trap Destination #1 The IP address of trap destination #1 where SNMPtrap messages are forwarded.Community Name #1 The SNMP community name to use for traps forwardedto trap destination #1.Trap Destination #2 The IP address of trap destination #2 where SNMPtrap messages are forwarded.Community Name #2 The SNMP community name to use for traps forwardedto trap destination #2.Trap Destination #3 The IP address of trap destination #3 where SNMPtrap messages are forwarded.Community Name #3 The SNMP community name to use for traps forwardedto trap destination #3.Trap Destination #4 The IP address of trap destination #4 where SNMPtrap messages are forwarded.Community Name #4 The SNMP community name to use for traps forwardedto trap destination #4.
