Chapter 10: The Port Redirect Function Screen10-2ESX-1320/ESX-1380 Local Management Guide10.1 PORT REDIRECT FUNCTION SCREEN FIELDSThe following list describes each of the Port Redirect Function screenfields:Source Port (Read-only)Shows which ports are currently set as source ports.Destination Port (Read-only)Shows which ports are currently set as destination ports.Source Port [n] (Selectable)Allows you to select a port [n] to be changed to a source port.Destination Port [n] (Selectable)Allows you to select a port [n] to be changed to a destination port.Status Port (Selectable)Allows you to add or delete a source port and/or a destination port.10.2 CHANGING SOURCE AND DESTINATION PORTSAdd or delete source port and destination port entries, as follows:1. Use the arrow keys to highlight the SOURCE PORT command field.2. Press the SPACE bar or BACKSPACE one or more times to incrementor decrement the port number displayed in the brackets [n] until theappropriate port number is displayed.3. Use the arrow keys to highlight the DESTINATION PORTcommand field.4. Use the SPACE bar or BACKSPACE again to step to the appropriateport number for the destination port.5. Use the arrow keys to highlight the STATUS command field.6. Use the SPACE bar to select either the ADD or DEL (delete) option.Press ENTER. This adds or deletes the port selections made in steps 2and 4 and also updates the screen SOURCE PORT andDESTINATION PORT list.