Chapter 12: The MIB-2 Statistics Screen12-4ESX-1320/ESX-1380 Local Management Guide2. Press [+/=] or [–] until the desired time/frequency appears (thisnumber increments/decrements in 3 second intervals with a minimumof 3 seconds and a maximum of 99 seconds).3. Press ENTER.12.3 CLEARING STATISTICS COUNTERSThe ESX provides a mechanism for resetting the statistics counterdisplays for all interfaces to zero. To clear counters, perform the followingsteps:1. Use the arrow keys to highlight the CLEAR COUNTERS commandfield.2. Press ENTER. All counters will be reset to zero and be updated afterthe current UPDATE-FREQ has passed.12.4 SELECTING AN INTERFACEWhen the Bridge Statistics Screen first appears, statistics are displayed forInterface 1, Interface 2, and Interface 3. To view statistics for otherinterfaces, perform the following steps:1. Use the arrow keys to highlight any one of the INTERFACE fields atthe bottom of the screen.2. Press SHIFT and [+/=] or [–] until the desired interface appears.3. Press ENTER. Statistics associated with the selected interface appear.!CAUT IONLocal Management does not ask for verification before clearingcounters. Initiating this command will clear the countersimmediately.
