Chapter 3: Configuring the FN100Page 3-18Fast Network 100 User Guide3.14.2 System NameThe system name is a name assigned to the FN100 by the networkadministrator. By convention, the system name is the fully qualifieddomain name. (This name then becomes the LCM prompt.)sysName - {system 5}DisplayString (SIZE (0..255))3.14.3 System LocationThe system location identifies the physical location of the FN100.sysLocation - {system 6}DisplayString (SIZE (0..255))3.14.4 Authentication PasswordThe set password and get password variables (from the proprietary MIB),must be initialized with the correct authentication passwords.All requests from any SNMP manager contain a community name field.For set requests, the community name must match the set password;otherwise, the request will be rejected by the FN100. For get requests, thecommunity name must match either the set password or the get password.3.14.4.1 Set PasswordThe set password variable (sfadminAnyPass) must be set to the value ofthe community name used by the SNMP manager for performing eitherset or get operations. A zero length password means that any communityname is acceptable.sfadminAnyPass - {sfadmin 2}DisplayString (SIZE (0..24))
