Cabletron Systems HSIM-W6 Installation Manual

Also see for CyberSWITCH HSIM-W6: Setup guide Configuration guide User guide User guide

Contents

Chapter 2: About the HSIM-W62-18HSIM-W6 Installation Guideread-write — This access level allows editing of some device configuration parameters notincluding changing system passwords.super-user — This access level allows full management privileges, allowing access to QuickSET.Simple Network Management Protocol (SNMP)The HSIM-W6 provides SNMP agent support for the following: standard and Enterprise SpecificManagement Information Bases (MIBs), and support for standard and Enterprise Specific SNMPTraps. SNMP is also used internally for configuration of the HSIM-W6. The active SNMP agentwithin the HSIM-W6 accepts SNMP requests for status, statistics and configuration updates.Communication with the SNMP agent occurs over the LAN or WAN connection. Anymanagement application using SNMP over UDP/IP has access to the local SNMP agent.SNMP MIB SupportSNMP MIBs are databases of objects used for managing and determining the status andconfiguration of an SNMP compliant device.The following SNMP MIBs are supported by the HSIM-W6:• MIB II RFC1213• RMON MIB RFC1271• DS1 and E1 MIB RFC1406 (Digital Signal Level 1 [T1/E1 interface types])• IETF Bridge MIB RFC1493• IP Forwarding MIB RFC1354• PPP LCP MIB RFC1471 (Point-to-Point Protocol, Link Control Protocol)• PPP IPCP MIB RFC1473 (IP Control Protocol)• PPP BNCP MIB RFC1474 (Bridge Network Control Protocol)• IPXCP MIB RFC1552 (PPP Internetworking Packet Exchange Control Protocol)• Frame Relay DTE MIB RFC2115• Security MIB RFC1472 (CCP, PAP, and CHAP)• RS-232 MIB RFC1317• LQM MIB RFC1989• PPP MP RFC1990