Cabletron Systems SEHI SEHI100TX- User Manual

Also see for SEHI100TX-22: User guide User guide

Contents

The Trap Table ScreenSEHI100TX User’s Guide7-15TrapsEnables transmission of the traps to the network management station withthe associated IP address.Trap IP AddressIndicates the IP address of the workstation to receive trap alarms from theSEHI.7.7.1 Configuring the Trap TableUse the following steps to configure the Trap Table:1. Use the arrow keys to highlight the SNMP Community Name field,then enter the community name.2. Press ENTER.3. Use the arrow keys to highlight the Traps field and enter Y to sendalarms from the SEHI to the workstation, or N to prevent alarms frombeing sent.4. Press ENTER.5. Use the arrow keys to highlight the appropriate Trap IP Addressfield.6. Enter the IP address of the workstation that you want to send traps toin this field. The format for this entry is XXX.XXX.XXX.XXX, withthe value of XXX ranging from 0 to 255, and three dots, or else itreturns to the beginning of the field.7. Use the arrow keys to highlight the SAVE option, then press ENTERor F6. The “SAVED OK” message appears indicating that the changeshave been saved to memory.7.7.2 Exiting the Trap Table ScreenUse the following steps to exit the Trap Table screen and return to theFeature Selection screen:1. Press the appropriate Function key. To exit to the Feature Selectionscreen, use the arrow keys to highlight the RETURN command.2. Press ENTER. The Feature Selection screen appears.