Cabletron Systems SEHI SEHI100TX- User Manual

Also see for SEHI100TX-22: User guide User guide

Contents

SEHI100TX User’s GuideB-1APPENDIX BIMAGE FILE DOWNLOAD USING OIDSThis appendix provides instructions for setting up a TFTP server and todownload an image file to the SEHI by setting specific MIB OID strings.Set the OID strings with the SNMP Tools screen described in Chapter 7.The SEHI supports the Standard Local Download application. In thisapplication the SEHI automatically disables management while downloadof the new firmware image is in progress.Before downloading the image to a device, you must do the following:• Load the image file onto your network TFTP server.• Decompress the image file.NOTEDownload an image file to the SEHI with a remotemanagement package such as SPECTRUM, SPECTRUMElement Manager, or the appropriate SPECTRUM PortableManagement Application. Refer to the specific packagedocumentation for image file download procedures.NOTEFor information on how to setup a workstation as a TFTPserver, refer to your specific workstation documentation andthe guidelines outlined in this instruction guide.