Cabletron Systems SmartSTACK ELS100-S24TX2M Management Manual

Also see for SmartSTACK ELS100-S24TX2M: Quick installation guide Quick installation guide User guide

Contents

18 ELS100-S24TX2M User Interface ELS100-S24TX2MSelection DescriptionDevice Control MenuPort Configuration Enables any port, enables/disables flow control, and setscommunication mode to auto-negotiation, full duplex or halfduplex.Port Information Displays operational status, including link state, flow controlmethod, and duplex mode.Spanning TreeConfigurationEnables Spanning Tree Algorithm; also sets parameters forhello time, maximum message age, switch priority, andforward delay; as well as port priority and path cost.Spanning TreeInformationDisplays full listing of parameters for the Spanning TreeAlgorithm.Mirror PortConfigurationSets the source and target ports for mirroring.Port TrunkingConfigurationSpecifies ports to group into aggregate trunks.IGMP Configuration Configures IGMP multicast filtering.Extented BridgeConfigurationDisplays/configures extended bridge capabilities provided bythis switch, including support for traffic classes, GMRPmulticast filtering, and VLAN extensions.802.1P Configuration Configures default port priorities and queue assignments.802.1Q VLANBase InformationDisplays basic VLAN information, such as VLAN versionnumber and maximum VLANs supported.802.1Q VLAN CurrentTable InformationDisplays VLAN groups and port members.802.1Q VLAN StaticTable ConfigurationConfigures VLAN groups via static assignments, includingsetting port members, or restricting ports from beingdynamically added to a port by the GVRP protocol.802.1Q VLANPort ConfigurationDisplays/configures port-specific VLAN settings, includingPVID, ingress filtering, and GVRP.Port GARPConfigurationConfigures settings used in multicast filtering.Network Monitor MenuPort Statistics Displays statistics on network traffic passing through theselected port.RMON Statistics Displays detailed statistical information for the selected portsuch as packet type and frame size counters.Unicast Address Table Provides full address listing, as well as search and clearfunctions.IP MulticastRegistration TableDisplays all the multicast groups active on this switch,including multicast IP addresses and corresponding VLANIDs.Static Unicast AddressTable ConfigurationUsed to manually configure host MAC addresses in theunicast table.System Restart Restarts system with options to use POST, or to retainfactory defaults, IP settings, or user authentication settings.Exit Exits the configuration program.