Cabletron Systems SmartSTACK ELS100-S24TX2M Management Manual

Also see for SmartSTACK ELS100-S24TX2M: Quick installation guide Quick installation guide User guide

Contents

22 ELS100-S24TX2M User Interface ELS100-S24TX2MManagement Setup MenuAfter initially logging onto the system, adjust the communicationparameters for your console to ensure a reliable connection (Serial PortConfiguration). Specify the IP addresses for the agent module (NetworkConfiguration / IP Configuration), and then set the Administrator and Userpasswords (Console Login Configuration). Remember to record them in asafe place. Also set the community string which controls access to the on-board SNMP agent via in-band management software (SNMPConfiguration). The items provided by the Management Setup Menu aredescribed in the following sections.Figure 2-6. Management Setup MenuSmartSTACK Local Management -- ELS100-S24T X2MManagement Setup MenuNetwork Configuration ...Serial Port Configuration ...SNMP Configuration ...Console Login Configuration ...T FTP Download ...Use or arrow keys to move. < Enter> to select.Selection Descr iptionNetworkConfigurationIncludes IP setup, Ping facility, HTTP (Web Agent) setup, Telnetconfiguration, and MAC address.Serial PortConfigurationSets communication parameters for the serial port, includingmanagement mode, baud rate, console time-out, and screendata refresh interval.SNMP Configuration Activates traps; and configures communities and trap managers.Console LoginConfigurationSets user names and passwords for system access, as well asthe invalid password threshold and lockout time.TFTP Download Downloads new version of firmware to update your system (in-band).