Cabletron Systems SmartSwitch 04-0053-01 User Manual

Also see for SmartSwitch 9A100: User guide Upgrade instructions Installation and setup guide

Contents

Cabletron Systems SmartSwitch 04-0053-01 User Manual Manual pdf 123 page image

SmartSwitch ATM User Guide A-7Agent Support Managing an ATM SmartSwitch- p2mpRoot- p2mpLeaf• atmVplReceiveTrafficDescrIndex — Doesn’t accept ABR traffic descriptor• atmVplTransmitTrafficDescrIndex — Doesn’t accept ABR traffic descriptorNot SupportedThe following MIB objects are not supported. If used, these objects return either the value zero or the message, “Notsupported.”• atmInterfaceDs3PlcpTable• atmInterfaceTCTable• atmSvcVpCrossConnectTable• atmSigSupportTable• atmSigDescrParamTable• atmIfAdminAddrTable• atmVclAddrBindTable• atmAddrVclTable• atmVclGenTable• atmfMyOsiNmNsapAddress• lecRouteDescrTable• leRDArpTableA.2 MANAGING AN ATM SMARTSWITCHYour ATM SmartSwitch must be IP reachable by the NMS before it can be managed. The default connection betweenthe ATM SmartSwitch and the NMS is the Ethernet interface of the ATM SmartSwitch. Use the show switchconfigcommand to find the IP address of the ATM SmartSwitch. An NMS can use this IP address to reach the ATMSmartSwitch through Ethernet. An NMS can also manage an ATM SmartSwitch through one of its ATM ports if theATM SmartSwitch has a client connection into a VLAN or emulated LAN.Note that the ATM SmartSwitch itself, is not reachable through ATM until a client for the switch is created andparticipates as a member of a VLAN or ELAN. Your NMS uses that switch client’s address to access and manage theswitch.To create a client for the switch, use the add ipatmclient command for VLANs and add laneclient for emulatedLANs.Use the set mynmaddr command to tell the ATM SmartSwitch which interface to use when communicating with yourNMS. For detailed information about these commands, see the SmartSwitch ATM Reference Manual.A.2.1 Console Commands that Affect the AgentThe following is a list of the console commands that affect the operation of the ATM SmartSwitch SNMP agent. Fordetailed descriptions of these commands, see the SmartSwitch ATM Reference Manual.