SmartSwitch Router User Reference Manual 135Chapter 7: Routing Policy Configuration Guide4. Create a Direct export source since we would like to export direct/interface routes.5. Create the export-policy redistributing the statically created default route, and all(RIP, Direct) routes into RIP.Exporting a Given Static Route to a Specific RIP InterfaceIn this case, router R1 would export/redistribute the default route over its interface140.1.1.1 only.1. Create a RIP export destination for interface with address 140.1.1.1, since we intend tochange the rip export policy only for interface 140.1.1.1.2. Create a static export source since we would like to export static routes.3. Create a RIP export source since we would like to export RIP routes.4. Create a Direct export source since we would like to export direct/interface routes.5. Create the Export-Policy redistributing the statically created default route, and all(RIP, Direct) routes into RIP.ip-router policy create direct-export-source directExpSrcip-router policy export destination ripExpDst source statExpSrcnetwork defaultip-router policy export destination ripExpDst source ripExpSrcnetwork allip-router policy export destination ripExpDst source directExpSrcnetwork allip-router policy create rip-export-destination ripExpDst141interface 140.1.1.1ip-router policy create static-export-source statExpSrcip-router policy create rip-export-source ripExpSrcip-router policy create direct-export-source directExpSrcip-router policy export destination ripExpDst141 source statExpSrcnetwork defaultip-router policy export destination ripExpDst141 source ripExpSrcnetwork allip-router policy export destination ripExpDst141 source directExpSrcnetwork all
