PARK TILT MIRRORSThis feature allows you to select whether or not theoutside mirror(s) will automatically tilt down whenthe vehicle is shifted into R (Reverse). See OutsidePower Foldaway Mirrors on page 2-47 for moreinformation.Press the customization button until PARK TILTMIRRORS appears on the DIC display. Press theset/reset button once to access the settings forthis feature. Then press the customization button toscroll through the following settings:OFF (default): Neither outside mirror will be tilted downwhen the vehicle is shifted into R (Reverse).DRIVER MIRROR: The driver’s outside mirror will betilted down when the vehicle is shifted into R (Reverse).PASSENGER MIRROR: The passenger’s outsidemirror will be tilted down when the vehicle is shifted intoR (Reverse).BOTH MIRRORS: The driver’s and passenger’s outsidemirrors will be tilted down when the vehicle is shiftedinto R (Reverse).NO CHANGE: No change will be made to this feature.The current setting will remain.To select a setting, press the set/reset button while thedesired setting is displayed on the DIC.EASY EXIT RECALLIf your vehicle has this feature, it allows you to selectyour preference for the automatic easy exit seat feature.See Memory Features on page 1-7 for more information.Press the customization button until EASY EXITRECALL appears on the DIC display. Press the set/resetbutton once to access the settings for this feature.Then press the customization button to scroll throughthe following settings:DOOR BUTTON ONLY: No automatic seat exit recallwill occur. The recall will only occur after pressingthe easy exit seat button.BUTTON AND KEY OUT (default): If the features areenabled through the EASY EXIT SETUP menu, thedriver’s seat will move back, and the power steeringcolumn will move up when the key is removed from theignition or after pressing the easy exit seat button.The automatic easy exit seat movement will only occurone time after the key is removed from the ignition.If the automatic movement has already occurred, andyou put the key back in the ignition and remove it again,the seat and steering column will stay in the originalexit position, unless a memory recall took place prior toremoving the key again.3-62
