Remote Keyless Entry (RKE)SystemThe Remote Keyless Entry (RKE) system operates on aradio frequency subject to Federal CommunicationsCommission (FCC) Rules and with Industry Canada.This device complies with Part 15 of the FCC Rules.Operation is subject to the following two conditions:1. This device may not cause interference.2. This device must accept any interference received,including interference that may cause undesiredoperation of the device.This device complies with RSS-210 of Industry Canada.Operation is subject to the following two conditions:1. This device may not cause interference.2. This device must accept any interference received,including interference that may cause undesiredoperation of the device.Changes or modifications to this system by other thanan authorized service facility could void authorization touse this equipment.If there is a decrease in the RKE operating range,try this:• Check the distance. The transmitter may be too farfrom the vehicle. Stand closer during rainy orsnowy weather.• Check the location. Other vehicles or objects maybe blocking the signal. Take a few steps to theleft or right, hold the transmitter higher, andtry again.• Check the transmitter’s battery. See “BatteryReplacement” later in this section.• If the transmitter is still not working correctly, seeyour dealer/retailer or a qualified technician forservice.Remote Keyless Entry (RKE)System OperationThe Remote Keyless Entry (RKE) transmitter functionswork up to 195 feet (60 m) away from the vehicle.There are other conditions which can affect theperformance of the transmitter. See Remote KeylessEntry (RKE) System on page 2-4.2-4
