Black plate (72,1)Cadillac SRX Owner Manual - 201110-72 Vehicle CareDo not include the compactspare tire in the tire rotation.After the tires have beenrotated, adjust the front andrear inflation pressures asshown on the Tire and LoadingInformation label. See TirePressure on page 10‑63and Vehicle Load Limits onpage 9‑12.Reset the Tire Pressure MonitorSystem. See Tire PressureMonitor Operation onpage 10‑67.Make certain that all wheelnuts are properly tightened.See “Wheel Nut Torque” underCapacities and Specifications onpage 12‑2.{ WARNINGRust or dirt on a wheel, or on theparts to which it is fastened, canmake wheel nuts become looseafter time. The wheel could comeoff and cause an accident. Whenchanging a wheel, remove anyrust or dirt from places where thewheel attaches to the vehicle.In an emergency, use a cloth ora paper towel to do this; but besure to use a scraper or wirebrush later, if needed, to get allthe rust or dirt off. See If a TireGoes Flat on page 10‑79.Lightly coat the center of thewheel hub with wheel bearinggrease after a wheel changeor tire rotation to preventcorrosion or rust build-up.Do not get grease on the flatwheel mounting surface oron the wheel nuts or bolts.When It Is Time for NewTiresFactors such as maintenance,temperatures, driving speeds,vehicle loading, and road conditionsaffect the wear rate of the tires.Treadwear indicators are one wayto tell when it is time for new tires.Treadwear indicators appear whenthe tires have only 1.6 mm (1/16 in)or less of tread remaining. See TireInspection on page 10‑71 and TireRotation on page 10‑71 for moreinformation.Ofrecido por www.electromanuales.com
